How To Reconnect OX230 and EX230 Via Firmware Upgrade
Today I will feed to you on how to reconnect your OX-230 and EX-230 credit to lestat26 for the info. This tutorials required firmware upgrades so download the file at the bottom of this page first before you proceed to the procedure.
This post may solve the same below queries:
Procedure:
Step1:
Upgrade your firmware using this firmware web_update_v2.10.14.x_trans.gz , wait until it successfully completed. (for EX230 users skip step2)
Step2:
Then re-upgrade using this firmware web_update_OX230250_v2.10.14.8-g1.0.2-gp.gz, wait until it successfully completed.
Step3:
Go to Reset Factory Default, then wait for the modem to reboot.
Step4:
Insert PEM and KEY, and then change your Mac and reboot your modem. I already posted on how to change mac OX230 via telnet command check it out for those new users of OX.
Download:
web_update_v2.10.14.x_trans.gz
web_update_OX230250_v2.10.14.8-g1.0.2-gp.gz
This post may solve the same below queries:
- How to reconnect my disconnected OX230 and EX230 modem?
- Reconnection for EX230 and OX230 step by step procedure.
- Upgrade Firmware for EX230 and OX230?
- Free Download Firmware of OX230 and EX230 modem.
- Solution for disconnected OX-230 modem.
- Solution for disconnected EX-230 modem.
Procedure:
Step1:
Upgrade your firmware using this firmware web_update_v2.10.14.x_trans.gz , wait until it successfully completed. (for EX230 users skip step2)
Step2:
Then re-upgrade using this firmware web_update_OX230250_v2.10.14.8-g1.0.2-gp.gz, wait until it successfully completed.
Step3:
Go to Reset Factory Default, then wait for the modem to reboot.
Step4:
Insert PEM and KEY, and then change your Mac and reboot your modem. I already posted on how to change mac OX230 via telnet command check it out for those new users of OX.
Download:
web_update_v2.10.14.x_trans.gz
web_update_OX230250_v2.10.14.8-g1.0.2-gp.gz
Comments
Post a Comment