How To Install Android Kitkat 4.4.2 (CM11) on Galaxy Tab P1000
This tutorial is intended only for the old Samsung Galaxy Tab P1000 (GSM)
Disclaimer: Before beginning with the procedure to install Android 4.4 Kitkat on Galaxy Tab P1000 version you must know that once the procedure in the tutorial is followed your warranty stands void. The given method is risky and can cause your device to brick. It is therefore recommended that you follow the procedure carefully and perfectly. The processes that you carry out on your device are solely at your risk. I do not take responsibility for any damage to your device.
Download Cyanogenmod 11 for P1000 ----> HERE
Download Google Apps (gapps) ----> HERE
This tutorial is intended for SGT-P1000 running:
Android 2.3 Gingerbread
Android 4.0.4 (based on Cyanogenmod 9)
Android 4.1 (based on Cyanogenmod 10)
Your device should be rooted and clockwordmod recovery (CWM) installed in it.
INSTRUCTIONS:
Note: If you are running 2.2 please update your device first to 2.3 and root it and install CWM in it before proceeding. Try to google it. If you are running 2.3 but not yet rooted and no CWM recovery installed, click here.
1. Download the two files and place both in a folder or a location in your device's internal storage where you can easily find it. Don't unzip, just copy and paste the files.
2. Back up all your important data (apps, contacts, etc.). You can do this or not if there's nothing important to back up.
3. Power off your tablet.
4. Enter CWM recovery by powering your device off and then powering it back on while keeping the ‘Volume-Up’ button pressed.
5. While navigating on CWM use Volume up and down as directional buttons and Power as enter button.
6. Select wipe/data factory reset. Select wipe cache partition and go to "advanced" and select "wipe dalvik cache" and once finished, press the back button of your tab.
7. Now select the “install zip from sdcard” option and then choose “choose zip from sd card” option. Go to the folder where you placed the cm11 file and select it. Your system will reboot because it will first update your CWM to CWM v6.
8. When the new CWM interface appears, select "install zip" then "choose zip from/storage/sdcard0 and go to the folder where you placed the cm11 file and select it again to continue installing. It may take less than 5 minutes so be patient.
9. Once finished go back to the same location and select google apps to install it. It may take less than 5 minutes so be patient.
10. Once finished tap "reboot system now". First boot from installation may take up to 5 to 10 minutes for the first time but after that it will normally open in a short time.
11. Enjoy your Samsung Galaxy Tab p1000 running Android 4.4.2
Download Cyanogenmod 11 for P1000 ----> HERE
Download Google Apps (gapps) ----> HERE
This tutorial is intended for SGT-P1000 running:
Android 2.3 Gingerbread
Android 4.0.4 (based on Cyanogenmod 9)
Android 4.1 (based on Cyanogenmod 10)
Your device should be rooted and clockwordmod recovery (CWM) installed in it.
Note: If you are running 2.2 please update your device first to 2.3 and root it and install CWM in it before proceeding. Try to google it. If you are running 2.3 but not yet rooted and no CWM recovery installed, click here.
1. Download the two files and place both in a folder or a location in your device's internal storage where you can easily find it. Don't unzip, just copy and paste the files.
2. Back up all your important data (apps, contacts, etc.). You can do this or not if there's nothing important to back up.
3. Power off your tablet.
4. Enter CWM recovery by powering your device off and then powering it back on while keeping the ‘Volume-Up’ button pressed.
5. While navigating on CWM use Volume up and down as directional buttons and Power as enter button.
6. Select wipe/data factory reset. Select wipe cache partition and go to "advanced" and select "wipe dalvik cache" and once finished, press the back button of your tab.
7. Now select the “install zip from sdcard” option and then choose “choose zip from sd card” option. Go to the folder where you placed the cm11 file and select it. Your system will reboot because it will first update your CWM to CWM v6.
8. When the new CWM interface appears, select "install zip" then "choose zip from/storage/sdcard0 and go to the folder where you placed the cm11 file and select it again to continue installing. It may take less than 5 minutes so be patient.
9. Once finished go back to the same location and select google apps to install it. It may take less than 5 minutes so be patient.
10. Once finished tap "reboot system now". First boot from installation may take up to 5 to 10 minutes for the first time but after that it will normally open in a short time.
11. Enjoy your Samsung Galaxy Tab p1000 running Android 4.4.2
