How To Use Winspreader v0.7 - Flash | Upgrade | Downgrade | Huawei Modem

This tutorial is intended  for Proper Use of Winspreader v0.07 to avoid damaged on your Modem make sure to follow properly this procedure.

STEP 1:A. I-Download the WinSpreader V0.7 and the Firmwares you need, unzipped then put it in your Desktop.


B. OPEN the folder then RUN the WinSpreader.exe


STEP 2:A. Browse the Firmware file you will be using. Example: SQUASHFS666-DV235t-v1.0.7-smart.tar.gz credit to mediatek team of squashfs.

B. Choose your Lan/Ethernet Adapter will be use for flashing..

If your modem is already turn on and connected. Disconnect the LAN Cable and the Power of your modem before  to proceed to the next step.


STEP 3: A. Tick START sa Winspreader V0.7.exe.

B. Insert the LAN Cable and Power ng modem. Just wait for the winspreader to flash your firmware atleast 10 minutes just to be sure that the upgrade or downgrade was successful.
Note: Make sure that your modem will not interrupt during the flashing . Be careful. turn on the modem then just wait and relax to complete the flashing. You can take a coffee during this process! xD
C. You can now access your GUI default IP 192.168.254.1 Log In using Admin account go to ACL and ENABLE the Telnet.
D. Go to CMD then type telnet 192.168.254.1
Login:Firefly
Pass:$P4mb1h1r4N4m4nT0!!
at prompt type:
apinfo > /etc/default.cfg (press enter)
sncfg reset (press enter)
reboot
E. Congratulation! You can now change mac address to connect to network

Read Also: 
BM622m Upgrade Firmware v22 2013 Click HERE
Upgrade and Downgrade Firmware 2011 - 2013 Complete List Free Download Click HERE

DOWNLOAD : Winspreader v0.07

Tags:

• How To User Winspreader v0.7
• Steps On How To Upgrade Downgrade Firmware
• Upgrade Huawei Wimax Firmware Using Winspreader
• Downgrade Firmware Huawei Modems
• How To Repair Huawei Modem No Signal, Blinking Lights, Ready Only, Connecting Only